Laminado

LAMINATED

Laminated finish

In 2019 we introduced to the market our new range of laminated finishes for all our series of façades, panels and interior cladding, after an investment to install a new production line for this process, with the highest technology of the European company Barberán.

Together with the German companies Renolit and Continental-Skai, our strategic partners and suppliers of the raw material for these finishes, we offer a range of nearly 300 different colors and textured finishes that reproduce in the most realistic way an extensive selection of woods and other materials, which do not require special maintenance and with a limited warranty, ranging from 5 to 20 years on exterior products.

Juma Z

JUMA Z

Technical Ventilated Façades
Snap-On Systems

Traditional form Z that proposes a highly aesthetic design engineering that privileges the protagonism of the slat by hiding behind it, the supports or slat holders.

The supports or louver holders are equally stamped to facilitate the anchoring of the louvers at the level without the need to use fastening screws or oppressors that can be loosened or oxidized due to exposure to environmental agents.

The Z slats can be separated from each other by project variables to generate a greater aeration surface or natural light input to the detriment of rainwater ingress and greater exposure to the outside view.

FEATURES

COVERING

The coverage slats have as main objective to restrict the views and limit the entry of natural light, rainwater and air into the installed area, in addition to providing aesthetic value to a facade.

SNAP-ON SYSTEM

The installation of snap-on systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

Juma C

JUMA C

Technical Ventilated Façades
Snap-On System

Alternative design to our Z model that proposes a more innovative and purposeful curved shape in its design, while maintaining the engineering conditions of all JUMA models in favor of highlighting the esthetics of the louver in the architectural design of facades.

The supports or louver holders are equally stamped to facilitate the anchoring of the louvers at the level without the need to use fastening screws or oppressors that can be loosened or oxidized due to exposure to environmental agents.

The JUMA C model offers three options for separating slats depending on the degree of coverage and aeration surface.

FEATURES

COVERING

The coverage slats have as main objective to restrict the views and limit the entry of natural light, rainwater and air into the installed area, in addition to providing aesthetic value to a facade.

SNAP-ON SYSTEM

The installation of snap-on systems offers several benefits:

  • The benefits inherent to the ventilated façade
  • A variety of models
  • One dimensional and multidimensional design options
  • Multiple combinations to create dynamic sights
  • Ample response to technical demands
  • Light weight, high wind load resistance > 249 km (155 miles)/hour
  • Avoids oxidation risks
  • Facilitates aligning the slats
  • Reduces installation times
  • Offers a wide price range

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

Windflow

Windflow

Technical Ventilated Façades
Snap-On Systems

This WINDFLOW design favors the entry of air, disables the view to the interior of the machine rooms and blocks the entrance of rain unlike other proposals that offer high percentages of aeration but with a minimal visual coverage. Storm pressure drop values do not make this product recommendable for areas of high demand air conditioners because its design does not facilitate the flow of air (inlet / outlet) making it difficult to vent the equipment.

The WINDFLOW model incorporates details in its design that guarantee minimum levels of rainwater entry even in extreme wind pressure conditions. In addition, based on the result of the resistance test that determines a class 5 value for this louver (> 249 km / hour), its specification in hurricane areas is recommended.

FEATURES

COVERING

The coverage slats have as main objective to restrict the views and limit the entry of natural light, rainwater and air into the installed area, in addition to providing aesthetic value to a facade.

SNAP-ON SYSTEM

The installation of snap-on systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

Italia

Italia

Technical Ventilated Façades
Snap-On Systems

Description

FEATURES

COVERING

The coverage slats have as main objective to restrict the views and limit the entry of natural light, rainwater and air into the installed area, in addition to providing aesthetic value to a facade.

SNAP-ON SYSTEM

The installation of snap-on systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

Plana 78 – 170 – 177

Plana 78 - 170 -177

Technical Ventilated Façades
Snap-On Systems

It is a concept of smooth flat aluminum slats designed for application in ventilated façade projects or as cover louvers.

The three sizes of flat slats (78, 170 and 177 mm) can be installed independently or combined, while color and perforated textures can bee added for a more captivating look. The spacing between slats favors induced ventilation for the regulation of the temperature of the intermediate chamber between the louver and the building envelope, maintaining minimal water infiltration.

The application of lacquered or laminated wood-like coatings has expanded its specification area as a decorative option in the design of ceilings, pergolas and green walls.

FEATURES

COVERING

The coverage slats have as main objective to restrict the views and limit the entry of natural light, rainwater and air into the installed area, in addition to providing aesthetic value to a facade.

SNAP-ON SYSTEM

The installation of snap-on systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Plana Microperforado

Plana Microperforated

Technical Ventilated Façades
Snap-On Systems

Fixed louver solar control systems are designed to limit the direct solar incidence on the glazed surfaces, improve the thermal performance of the glass due to the shading capacity of the slat and maintain high levels of visual transfer from the inside.

The perforated Plana system gives the facade an opaque appearance from the outside, while from the inside, the perforated skin practically disappears being completely translucent. On the other hand, as the sun sets we will begin to perceive the gaps in the facade and the appearance of the facade is transformed by acquiring a different dynamism that is typical of these architectural applications.

FEATURES

SOLAR CONTROL

Solar control slats are designed to limit the direct incidence of natural light. They reduce the temperature inside the installed areas and favor transparency, allowing the user to enjoy a high degree of vision.

SNAP-ON SYSTEM

The installation of snap-on systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

Dune 67

Dune 67

Technical Ventilated Façades
Snap-On Systems

The DUNE model with a 67-degree inclination offers the prescriber a highly aesthetic and efficient sunshade that blocks the direct incidence of solar rays by 80% while maintaining a high degree of transparency allowing the user to enjoy a vision-free area greater than 70% of the installed surface.

The prescription of this louver in projects with large glass surfaces will allow you to reduce air conditioning costs by up to 30% depending on the degree of solar incidence on your facade. This condition may be favored in projects that require high levels of natural lighting.

FEATURES

SOLAR CONTROL

Solar control slats are designed to limit the direct incidence of natural light. They reduce the temperature inside the installed areas and favor transparency, allowing the user to enjoy a high degree of vision.

SNAP-ON SYSTEM

The installation of snap-on systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

V Series

V series

Technical Ventilated Façades
Snap-On Systems

We have developed the V SERIES with three sizes of slats (45 – 90 – 109 mm.) These project perpendicularly to the plane of the facade to generate shade and avoid direct solar impact on the glass, improving its thermal efficiency. The system allows the installation of vertical supports up to a maximum of 2.00 meters still guaranteeing its wind resistance class 5. This condition allows its use as an alternative protection element in hurricane zones.

V SERIES gives us the possibility to customize the façade by generating different volumes and degrees of opening between slats that allow us to adjust the lighting to the demand of the project. The slat sizes can be installed individually or combined while sharing the same die cut support.

The different sizes of its slats and separation options favor its decorative application in interiors and the design of pergolas as well.

FEATURES

SOLAR CONTROL

Solar control slats are designed to limit the direct incidence of natural light. They reduce the temperature inside the installed areas and favor transparency, allowing the user to enjoy a high degree of vision.

SNAP-ON SYSTEM

The installation of snap-on systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product:

Viewless

Viewless

Technical Ventilated Façades
Snap-On Systems

When the demand for privacy takes precedence over the degree of natural lighting in glazed areas, while maintaining the conditions that allow direct solar incidence to be controlled, a different design is required such as the VIEWLESS model. This proposal reduces the frontal view towards the interior of the area up to 35% without seriously affecting the level of lighting that is maintained in terms of 60% of the installed surface, all this, thanks to the projected design of its slats that transfer to the facade a high aspect of solidity even at higher altitudes.

The design of this model also incorporates qualities that limit the entry of rainwater and favor the required air flow in air conditioning equipment installations.

FEATURES

SOLAR CONTROL

Solar control slats are designed to limit the direct incidence of natural light. They reduce the temperature inside the installed areas and favor transparency, allowing the user to enjoy a high degree of vision.

SNAP-ON SYSTEM

The installation of snap-on systems offers several benefits: 

  • The benefits inherent to the ventilated façade 
  • A variety of models 
  • One dimensional and multidimensional design options 
  • Multiple combinations to create dynamic sights 
  • Ample response to technical demands 
  • Light weight, high wind load resistance > 249 km (155 miles)/hour 
  • Avoids oxidation risks 
  • Facilitates aligning the slats 
  • Reduces installation times 
  • Offers a wide price range 

TECHNICAL INFORMATION AND DOWNLOADS

Download the technical documents related to this product: